Archive for the ‘Industrial And Scientific’ Category

WordPress database error: [Table 'wp_usermeta' is marked as crashed and should be repaired]
SELECT meta_key, meta_value FROM wp_usermeta WHERE user_id = '13802' /* pluggable get_userdata */

Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit-Retail —-! Sale Only Price Too Low To Display!!

Samedi, juin 19th, 2010

Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit. Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit

Product: Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit-Retail —-! Sale Only Price Too Low To Display!!

List Price: —-

Amazon Price: Price Too Low To Display!
Click Here To See Amazon Sale Price

Add to cart to see low price@CHADPRODUCTITLE

Availability: In Stock

Usually ships in 24 Hours

Free Shipping Available

Compare Prices on Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit

Features and Benefits:

  • 3/8” Single sleeve ratcheting chuck
  • 3 3/4” Head length
  • Electronic Clutch - 11 Settings plus drill mode for complete control
  • Built In LED’s - Illuminates work surface and indicates clutch out
  • Extended Paddle Switch - Provides convenience and comfort

With a head size of only 3.75″, the M12™ Cordless 3/8″ Right Angle Drill Driver delivers 100 in-lbs of torque in a compact light weight design. The first sub-compact right angle drill driver with a spindle lock chuck, the 2415-21 is the most versatile right angle drill/driver in the industry. Built in electronics include an electronic clutch, fuel gauge, speed control and overload protection. Kit includes the following: Drill, 1 battery and charger.

  • Amazon Sales Rank: #1707 in Home Improvement
  • Brand: Milwaukee
  • Model: 2415-21
  • Number of items: 1
  • Dimensions: 1.00 pounds

Features

  • Features 3/8¿¿ Single Sleeve Ratcheting Chuck for Maximum Versatility and Grip. The 3 ¾¿¿ Head Length is Great For Working In Tight Spaces
  • An Extended Paddle Switch Allows for Controlled Use In Multiple Positions
  • Electronic Clutch 11 Settings Plus Drill Mode For Complete Control Built-In LED¿s Illuminate the Work Surface and Indicates Clutch Out
  • The On-Board Fuel Gauge Displays Remaining Run-Time on the M12 LITHIUM-ION Battery Pack
  • Kit includes: 2415-20 Right Angle Drill/Driver, (1) M12¿ LITHIUM-ION Battery Pack, 30-Minute Charger, Carrying Case

about the best cordless solution so far…4
Ok this is a very good tool. Milwaukee is very late to the small lithium market but they do appear to have done their homework. I really like the M12 line of Milwaukee tools.

I will focus my review by comparing the M12 to it’s main competitor the Bosch PS10-2A both are meant to be lighter duty cordless right angle drill/drivers for tight jobs like installing under cabinet lighting or drawer handles. They are not meant for removing 3/8 lag bolts or other heavy construction needs.

The head length on the M12 is about the same as the Bosch, ok actually it is 1/4 inch longer but it has a ratcheting chuck so it can take drill bits of all kinds without the need for an adapter. the Bosh has a hex speed chuck so you have to use hex drill bits or an adapter which effectively increases the head length well beyond the M12. Both have extended paddle grips, and the grips are both on the chunky side. My in the hand opinion is the M12 feels just a bit thinner and easier to grab. Speed control is much better on the M12 the trigger is very linear and easy to control. The Bosch is very poor in this regard, more of an on/off experience. The Bosch is slightly shorter in overall tool length. I did not measure it but about an inch when configured for rt angle use. Both tools use an electronic clutch and both are awful!!! the lowest setting will still spin out of a philips head when in a tight corner. Mechanical clutch would add weight and some bulk so it is a compromise. the M12 has more torque (100 vs 80) and a higher no load rpm (800 vs 600)

Now for the real kickers. The M12 has a spindle lock! Now why do you care? It allows you to use the tool as a “wrench” to finish tightening a screw or bolt by hand! the is very handy and allows for some muscle or finesse that you can not get with the Bosch. The M12 comes in a very nice case with a charger and feels very solid in the hand. Excellent tool.

So why why only 4 stars.. well two things the electronic clutch and the main reason… only comes with one battery! It is already a bit pricier then the Bosch (about $10 as of this writing) but the Bosch comes with 2 batteries. A spare M12 battery is about $40 so this is no small matter. I love this tool, I can forgive the clutch, but the lack of a second battery in what is suppose to be a pro tool is beyond cheap.

Specifications
Voltage 12V
No Load Speed - 800 RPM Bosch
Torque 100 in-lbs
Chuck Type 3/8 in Ratcheting
Head Length 3-3/4 in
Electronic Clutch Yes
Clutch Settings 11 + Drill
On Board Fuel Guage Yes
LED Light Yes
Battery LITHIUM-ION
No of Batteries Included 1
Charge Time 30 minutes
Length 11.75 in
Tool Weight 2.43 lbs

Milwwaukee 2415-21 M12 12 volt 3/8 RA Drill/Driver Kit5
Nice ‘lil drill. No chuck wobble, seems to hold bit tightly. Good addition to the M 12 line of power tools. No buyers regret on this tool.

having the right tool for the job is so much easier5
The specs for the drill can be found a number of places. My own personal experiences are as follows:

I am just beginning to get into cabinet making as a hobby. My current project involves about 1 doz drawers mounted on glides in very tight openings. I knew that my big drill/driver and my smaller drivers would not fit so I considered the following right angle drills:

Dewalt 18v
Bosch 12v
Milwaukee 12v

I decided to buy the Milwaukee based on a number of things:

Size (it is fairly consistent in its size with no large areas to work around)
Balance (the battery balances out the head nicely providing greater control)
Power (power enough to remove 3″ screws in hardwood)
Worklight (no need for a third hand installing shelf rails)

The Milwaukee balances quite nicely in the hand and does not have areas that are larger than the actual working portion of the device - unlike the Dewalt and it is rather slim overall - unlike the Bosch. This is especially noticable when working in tight areas. As a result it becomes more like a natural extension of your hand than that of a foriegn object.

I also like the variable speed trigger control and the built-in work light is perfect for placing screws in those dark corners of cabinets.

Some may complain that it only comes with one battery or the case is a soft zippered case instead of a hard case. Valid points- however consider that this Milwaukee is not meant to replace your primary drill that takes a beating and keeps on ticking, but rather to augment it like a fine precision tool for the times when beauty is needed over brawn. The battey issue was not a problem as I never used up the battery when installing the rails. Besides a complety dead battery charges in about 30 minutes and it is a L-ION type so between use refreshes are quite easiliy done with no detimental effect on the battery. A second battery can be stored in the case and the case itself is quite suitable for it purpose and how the tool will be used.

As to power - I recently had to remove some 3″ screws that were set in Oak with a corded right angle drill. The Milwaukee had no problem removing them. The clutch worked great and the work light made the process a lot safer.

I am more than pleased with the tool and I am sure that I will create new projects that will allow me to take full advantage of this tools special capabilities.

Electronic Cigarettes

Buy Flex Head Oxygen Sensor Wrench At Amazon!

Vendredi, juin 18th, 2010

Flex Head Oxygen Sensor Wrench. Flex Head Oxygen Sensor Wrench

Product: Buy Flex Head Oxygen Sensor Wrench At Amazon!

List Price: $46.82

Amazon Price: $10.00
Click Here To See Amazon Sale Price

Add to cart to see low price@CHADPRODUCTITLE

Availability: In Stock

Usually ships in 24 Hours

Free Shipping Available

Compare Prices on Flex Head Oxygen Sensor Wrench

Features and Benefits:

  • 22mm size covers 90% of all vehicles
  • Adjustable head allows for easy access to hard to reach places
  • Long handle provides extra torque
  • Lifetime warranty

  • Amazon Sales Rank: #11489 in Home Improvement
  • Brand: H & D Tools

great price4
after asking several tool sales reps for one of these i took upon my self to search the internet for one and walah found it even better it was at a low price so i bought two.

Quit Cigarette Smoking

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer Review.

Mardi, juin 15th, 2010

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer Review.

Compare & Purchase Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer at Amazon by clicking here!

List Price: $370.14

Amazon Price: $169.95

Click Here To Purchase At Amazon!

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer Description:

  • Amazon Sales Rank: #21457 in Home Improvement
  • Brand: Bostitch
  • Model: N62FNK-2
  • Dimensions: 4.75″ h x 16.25″ w x 14.38″ l, 3.80 pounds

Features

  • 1-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
  • Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
  • Durable, lightweight magnesium housing
  • Includes no-mar tip, 3 profile tips, 1,000 fasteners, durable plastic carrying case
  • 11.63-by-3.13-inches; extremely light 3.8-pounds; 7-year limited warranty

Customer Reviews:

Great gun - EXTREMELY light5
I bought this gun sight unseen (usually I go “touch” tools at the H— D—- first, but they didn’t have one) and am so far very pleased. When I took it out of the box, the first thing I noticed was how light it is. It’s amazing. Here’s my comments:

- The nail magazine is plastic and the housing is magnesium making this thing feel like a toy in your hand. I’m still a little skeptical about the plastic magazine and wonder if it would withstand the daily pounding of professional use (I’m only a heavy duty homeowner).

The good:

- The oil free engine is fantastic. No oil on your work and no need to remember to oil it.

- Easy to use and maintain.

- Pretty much jam free (I’ve shot plenty of nails through it already).

- VERY light.

The bad:

- Only shoots Stanley nails (PC and Senco shoot a different type of nail). Not a problem as I see it - [One home improvement store] sells them in boxes of 5000 (PC sells their nails in boxes of 1000).

- Plastic magazine - Not sure how long it will last.

Have No Fear5
I am in the process of remodeling my “old” house. The walls are plaster which have become very brittle and delicate over the years. Hammering to install new molding was out of the question. I needed a gun that was light, powerful, easy to operate, and didn’t require oiling so as not to make a mess in my home.

I purchased the Bostitch N62FNK-2 nailer (my first nailer) based on the customer reviews and manufacturer information. This gun is absolutely amazing! It delivered everything I wanted in a nailer. I saved money because I didn’t damage any of the existing plaster walls, all nails held firmly the first shot…hammering would have been a nightmare!!

I was a little apprehensive about using a nail gun since I had never owned one before. It was so easy and so fast!! My only improvement idea would be that the manufacturer offer variety nail packs, so you don’t have to buy such large quantities of only one size nail… BUT… Have No fear…Go for it…perhaps the best tool I have ever owned!

Best Finish nailer under $1,000,000!5
I have been shopping for a 15 or 16 gauge finish nailer for about six months. This Bostitch is the only 15 gauge angled nailer that I have found to be priced in the straight 16 gauge price range.
This is the best 15 gauge gun at any price. Just hold this gun in your hand and you will be convinced that you can’t buy a better gun, period.
I had narrowed my choices down to the Bostitch, Porter-Cable and the new DeWalt.
The PC was nice, the price was right and I have had great success with my PC 18 gauge brad nailer, but the 15 gauge PC was way too heavy. Almost twice the weight of the Bostitch.
The DeWalt fit my small hands like a glove, was very light weight and within my budget (if I stayed with the straight nailer vs the angled model). However, I shyed away from the DeWalt models because the contact trip assembly had too many bends which didn’t seem to operate as smoothly as the PC and Bostitch. The display model at a local hardware store already looked like it was on the verge of having problems. I’m not hard on my tools, but one nasty bump, or a fall off of the workbench and you might be out of business.
Finally the Bostitch!
At less than 4 lbs. it’s the lightest in it’s class, yet still packs the biggest punch of them all! 400 in./lbs. It only weighs about 1 lb. more than by Porter-Cable brad nailer.
The finish and quality are second to none. It just plain ol’ feels good in your hand. It’s balanced so well it feels like an extension of your hand.
I am on a major budget (per the wife), but this gun is definitely worth every penny of the MSRP of $…. So why is it selling for only $…? Either A) it’s a “typo”, or B) Amazon and/or Bostitch has gone loco. Whatever the reason, my advice is buy this nailer before they discover that they are practically giving it away. I’m sure this gun will be the standard by which all other finish nailers will be measured against. You will not regret this purchase!
“TEN Stars….Final answer”!

Amazon.com Product Description
Put the finishing touches on your projects with the Bostitch N62FNK-2 Angled Finish Nailer. A magnesium body makes this nailer durable and lightweight, and oil-free maintenance and an easy-load magazine make it easy to use. Adjustable settings let you set the perfect nail depth for the job, whether you’re working with furniture, molding, or trim.

The Bostitch N62FNK-2
Angled Finish Nailer
At a Glance:
  • 400 in./lbs. of driving power
  • Adjustable nail depth
  • Lightweight, durable magnesium housing
  • Includes 4 profile tips and 1,000 2-inch nails

1.25″ to 2.5″ nails are ideal for furniture projects or trim work. View larger.


With its lightweight magnesium
body, this nailer is perfect for
over-the-head jobs. View larger.


Angled profile tips help you drive nails at the proper depth and angle.
View larger.

Give Your Home a Professional Finish
The N62FNK-2 Finishing Nailer is the perfect tool for tackling the detail work that makes your home stand out. Use this nailer with a standard air compressor to add trim around windows and doors, apply crown molding, or work on furniture projects. For a pristine finish, a choice of four angled profile tips ensures the perfect drive every time. Also, this nailer features oil-free operation, so it’s easy to maintain and it won’t stain your workpieces.

Adjustable to Match the Task at Hand
The N62FNK-2 has adjustable nail-depth settings and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job quickly and easily. And with a driving power of 400 in/lbs, you can easily set 15-gauge finishing nails into even the most challenging hardwoods with power to spare.

Additionally, the N62FNK-2 has a tool-free magazine that holds 130 nails (1.25-inches to 2.5-inches in length), so you can knock out plenty of work in a single load. For added convenience, the magazine removes easily for cleaning and jam clearing.

Lightweight, Durable Construction for Everyday Use
The magnesium construction of the N62FNK-2 Angled Finish Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. Measuring 3.13 x 11.63 x 14.69 inches (WxHxL) and weighing just 3.8 pounds, this tool is perfect for over-the-head jobs, such as mounting crown molding, hanging shutters, installing cabinets, and more.

When you’ve finished the job, the N66C-1 and profile tips store neatly in a protective carrying case.

The Bostitch N62FNK-2 Angled Finish Nailer is backed by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers–many of them industry firsts.

What’s in the Box
Finish nailer, 1,000 two-inch nails, carrying case, and four profile tips.

Amazon.com
The first time you pick up the Bostitch N62FNK-2, you might wonder if such a lightweight finish nailer (it weighs just 3.8-pounds, the lightest in its class) can really get the job done. But once you pull the trigger and feel the 400-inch-pounds of driving power at your fingertips, those doubts will disappear and you’ll wonder how you ever did without it before. Rugged and sturdy enough for virtually any application, the N62FNK-2 delivers fast, clean, accurate results using finish nails from 1 to 2 1/2-inches in length. An oil-free engine means no unsightly stains on your work–a definite plus–and no need for messy lubrication, an even bigger positive. Tool-free maintenance and depth control only add to the allure. –Carl Thress

From the Manufacturer
This finish nail driver comes in a magnesium housing, making it durable although it weighs only 3.8-pounds–the lightest angled finish nailer available. The tool’s oil-free engine requires no lubrication and cannot stain work surfaces. It features 400-inch-pounds of driving power–the highest power-to-weight ratio available. Drives BFN-style finish nails from 1 to 2-1/2-inches long. tool-free removable magazine allows easy jam clearing and cleaning. Inline magazine provides greater accuracy. Also features tool-free depth control for quick countersinking adjustments and tool-free adjustable exhaust for directing airflow. kit includes no-mar tip, 1,000 fasteners, and carrying case.

Portable Pop Up Displays

Malco SB48AE The Beast Roof Shingle Removal Tool Discount.

Vendredi, juin 11th, 2010

Malco SB48AE The Beast Roof Shingle Removal Tool

Malco SB48AE The Beast Roof Shingle Removal Tool Discount.

Compare & Purchase Malco SB48AE The Beast Roof Shingle Removal Tool at Amazon by clicking here!

List Price: —-

Amazon Price: $65.10

Click Here To Purchase At Amazon!

Malco SB48AE The Beast Roof Shingle Removal Tool Description:

  • Amazon Sales Rank: #11211 in Home Improvement
  • Brand: Malco
  • Model: SB48AE
  • Number of items: 1

Features

  • Makes a tough job bearable
  • Cleanly lifts off shingles and pulls nails in one motion
  • Adjustable for handling any pitch
  • Replaceable 10 gauge tempered steel blades
  • 48 inch fiberglass handle

Customer Reviews:

One tough tool5
I have used “the beast” to remove several roofs, some with 3 layers of shingles. It stands up to heavy use and does a great job pulling nails and lifting the roofing. The 3-position pitch adjustment is a nice feature, but the caps come off the spring-held rod in the position adjustment which in turn allows the rod to slip out of position. This is a minor headache which needs a redesign. Overall, I think this is the best tool out there for removing old roofing.

great tool after I repaired it4
The tool was terrific… until all the nuts came loose and fell off and the adjustment pin kept falling out. After I replaced the standard nuts with inexpensive nylon locking nuts and duct tape the pin into place ( I have since found that the pin falls out becasue the internal spring was not attached. I can fix this and forget the tape.), the beast lived up to it’s name. My partner used a traditional roof rake. He couldn’t keep up with me. The beast easily removed nails, so I didn’t have to go back and remove nails left after stripping.

Cut through shingles like a knife through warm butter5
Never having stripped a roof before, I bought 2 “Beasts” at Amazon and one “Brand X” shingle remover off the shelf at the local hardware store to make sure I’d have a tool that actually worked well. The difference in the tools was AMAZING. The Beast made the awful, tough job of shingle stripping almost fun. This thing effortlessly EATS shingles and nails like I never imagined a tool could! The other, cheaper tool was an exercise in futility and frustration. It took a LOT more energy and effort to use than the Beast, and removed a lot less shingles in more time. After a very short period, the guys helping me would ONLY help if they could use a “Beast”. I was skeptical that a tools design could make so much difference, but the claims are true. BUY IT!!

From the Manufacturer
Shingle removal is a beast of a job but now, finally, there’s a tool that’s up to the task. The Beast shingle remover from Malco makes a tough job bearable. The Beast cleanly lifts off heavy loads of shingles and pulls nails in one motion. Long handled models are available with either an adjustable head for handling any roof pitch, or a versatile fixed head. Adjustable models feature 48 inch fiberglass handles. All long handled Beasts feature replaceable 10 gauge tempered steel blades with variable length teeth. A comfortable D-grip is also standard.

Toe Nail Fungus Treatment